Installation Guide

WWW.DECKED.COM | 208.806.0251

THESE MIGHT BE USEFUL: Watch installation videos at www.decked.com/video

HOW TO: DRAWER LOCKS

DECKED LOCKS ARE DESIGNED AS AN ADDITIONAL LINE OF DEFENSE IN KEEPING YOUR GEAR SECURE. WE HIGHLY RECOMMEND SAVING

YOURSELF A BRAIN CRAMP AND FOLLOW THESE INSTRUCTIONS.

STEP 1 :

ATTACH LOCK BRACE TO DRAWER WITH SCREWS PROVIDED.

ALIGN BRACE AGAINST LOCK CAVITY WALLS AS SHOWN.

DO NOT OVERTIGHTEN SCREWS!

STEP 2 :

TOOLS REQUIRED :

•Phillips Screwdriver

•Needle Nose Pliers

INSERT THREADED LOCK BARREL INTO DRAWER HOLE. ALIGN BARREL TO

MATCH SHAPE OF HOLE WITH SQUARED-OFF THREADLESS SIDES VERTICALLY

ALIGNED. SMALL SQUARE TAB ON LOCK BARREL SHOULD BE AT 12 O’CLOCK.

SLIDE LOCK WASHER ONTO BARREL AND THEN THREAD NUT ONTO BARREL.

TIGHTENING FIRMLY WITH PAIR OF PLIERS.

SMALL SQUARE TAB

PAGE 1
HOW TO: DRAWER LOCKS DECKED LOCKS ARE DESIGNED AS AN ADDITIONAL LINE OF DEFENSE IN KEEPING YOUR GEAR SECURE. WE HIGHLY RECOMMEND SAVING YOURSELF A BRAIN CRAMP AND FOLLOW THESE INSTRUCTIONS. TOOLS REQUIRED : •Phillips Screwdriver •Needle Nose Pliers STEP 2 : 1. INSERT THREADED LOCK BARREL INTO DRAWER HOLE. ALIGN BARREL TO MATCH SHAPE OF HOLE WITH SQUARED-OFF THREADLESS SIDES VERTICALLY ALIGNED. SMALL SQUARE TAB ON LOCK BARREL SHOULD BE AT 12 O’CLOCK.
PAGE 2
HOW TO: DRAWER LOCKS STEP 3 : SLIDE KEY INTO LOCK CORE AND INSERT LOCK CORE INTO THREADED LOCK BARREL WITH TEETH OF KEY FACING AS SHOWN IN DIAGRAM 3. 3. 4. STEP 4 : WITH LOCK CORE INSERTED AND SQUARE TAB ON LOCK BARREL AT 12 O’CLOCK, SLIDE GOOFY SHAPED WASHER ONTO LOCK CORE SUCH THAT THE STOPS ON THE WASHER ARE AT 9 O’CLOCK AND 12 O’CLOCK. THE 12 O’CLOCK STOP ON THE WASHER SHOULD BE POSITIONED AS SHOWN IN DIAGRAM 4. STEP 5 : SLIDE LOCK ARM ONTO LOCK CORE WITH ARM POINTING AS SHOWN IN DIAGRAM 5.