Installation Guide
STEP 1: DRIVER SIDE DECK ASSEMBLY
• Loosely bolt C-channel to the ledges on the inside of the two ammo cans. Make sure bolt head is
on the C-channel side, not inside ammo can; bag 1A. NOTE: The small rectangular slot in the
C-channel indicates the tailgate end.
• Line up the deck (sticker indicates driver side deck half) on top of the C-channel/ammo can assembly
and the vert bosses. NOTE: Tailgate side of vert has an axle hole at the bottom (see below).
• Bolt deck to C-channel/ammo can assembly; bag 1B for driver side tailgate ammo can, bag 1C for
driver side cabside ammo can.
• Go back and tighten loose bolts connecting ammo cans to C-channel.
• Bolt the deck to the vert; bag 1D. Do not use power tools.
• Grab your buddy to help you lift assembly onto driver side of truck bed.
1C
1A
1B
VERT
DRIVER SIDE DECK HALF
CABSIDE
AMMO CAN
VERT AXLE HOLE ON TAILGATE END
TAILGATE
AMMO CAN
1D
CCHANNEL
RECTANGULAR
HOLE IN CCHANNEL