Installation Guide

PREPARE BED: INSTALL SHIMS
• There are 4 DOUBLE STACKED shims provided:
• Using the information in the respective circular detail views:
a) Clean the surfaces thoroughly where the shims will be located.
b) Remove the layer of tape on the bottom of the shim to expose the adhesive surface.
c) Place the shim and apply with pressure.
A
B
CABSIDE
TAILGATE
1 1/2”
4”
DETAIL B
Place shim 1 1/2” from seam in floor (blue). Align tailgate side
of shim 4” from rear of floor. Repeat on passenger side.
DETAIL A
Align shim to seam in floor (blue). Place shim
2” from cabside panel of bed. Repeat on passenger side.
2”