Installation Guide

STEP 1: DRIVER SIDE DECK ASSEMBLY

• Loosely bolt C-channel to the ledges on the inside of the two ammo cans; bag 1A.

Note: The small rectangular hole in the C-channel indicates the tailgate side.

• Before bolting anything else together, line up the deck on top of the C-channel/ammo can

assembly and the bosses on the vert, fully assembled in position. This will make

everything level and easier to bolt in place.

Note: Tailgate side of vert has an axle hole at the bottom (see diagram below).

• Bolt deck to C-channel/ammo can assembly; bag 1B for driver side tailgate ammo can, bag 1C for

drivers side cabside ammo can.

• Tighten bolts connecting ammo cans to C-channel.

• Bolt the deck to the vert; bag 1D. Do not use power tools.

VERT

DRIVER SIDE DECK HALF

CCHANNEL

CABSIDE

AMMO CAN

VERT AXLE HOLE ON TAILGATE END

TAILGATE

AMMO CAN