Installation Guide

STEP 5: INSTALL PASSENGER SIDE DECK HALF

• Wake up your buddy to help you place the passenger side deck assembly into the bed so it overlaps

the driver side deck section. Slide until inside edge of the deck rests on the round bosses of the vert.

• Insert the J-hook through cabside side hole on the passenger side cabside ammo can and loosely

affix it to tie-down bracket (hook pointing upward); bag J5.

• Insert the J-hook through the tailgate side hole on the passenger side tailgate ammo can and

loosely affix it to the bracket with J-hook (hook pointing upward); bag J5.

• Bolt passenger side deck half to the vert; bag 5C (just like step 1D). Make sure all bolts

connecting deck to vert are snug, but no power tools.

• Alternately and gradually tighten all J-hooks to ensure deck is centered and secure. Do not tighten

one side of J-hooks all the way in one step.

• Install window covers in cabside ammo cans.

PASSENGER SIDE

DECK HALF

PASSENGER SIDE

CABSIDE AMMO CAN

PASSENGER SIDE

TAILGATE AMMO CAN

✕✕

➡

CAB

➡

CAB