Installation Guide

STEP 3: INSTALL DRIVER SIDE DECK HALF
• Insert the J-hook through the cabside hole on the driver side cabside ammo can and loosely affix it
to tie-down bracket with spherical washer, flat washer and nut; bag J7.
• Insert the J-hook through the center hole on the driver side tailgate ammo can and loosely affix it to
the tie-down bracket with spherical washer, flat washer and nut; bag J7.
IMPORTANT: Leave all J-hook screws loose until entire deck is in place.
✕
✕
J7
➡
CAB
J7
➡
CAB
✕
✕
NOTE: If your truck has “loop tie-downs”
instead of cleats, place the j-hook
(pointing upward) in the loop and use
the CENTER hole for the cabside ammo
can. Dodge manufactured various
configurations in this series truck.
DRIVER SIDE
CABSIDE AMMO CAN
DRIVER SIDE
TAILGATE AMMO CAN