Installation Guide

PREPARE BED: INSTALL SHIMS
• There are 4 SHIMS provided:
• Using the information in the respective circular detail views:
a) Clean the surfaces thoroughly where the shims will be located.
b) Remove the layer of tape on the bottom of the shim to expose the adhesive surface.
c) Place the shim and apply with pressure.
NOTE: DETAIL A and B are to be repeated on the passenger side.
A
B
CABSIDE
TAILGATE
DETAIL B
Place shim 3” from cabside panel. Center shim
between floor beads shown. Repeat opposite side.
DETAIL A
Place shim 5.5” from tailgate side of floor. Center
shim between floor beads shown. Repeat opposite side.
3”
5.5”