Installation Guide

MT6 | V1 | Page 11
INSTALL: MOUNTING + CABSIDE ATTACHMENT
• While supporting both ends, lift center vert + stud + cabside vert assembly in truck bed. Position against cabside
panel of bed with stud bracket cabside of cabside bracket.
• DETAIL A: Install a 3/4" length bolt and flanged nut and tighten securely; BAG PREP-MT6.
• Repeat passenger side.
A
➡
CAB
DETAIL A
3/4" BOLT
FLANGED NUT
NOTE: Make sure centerline arrows
on cabside vert are aligned with
your centerline mark (blue).
➡
CAB