FAQ

ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed
as an endorsement of the subject of the report or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as
to any finding or other matter in this report, or as to any product covered by the report.
Copy
right © 2022 ICC Evaluation Service, LLC. All rights reserved. Page 6 of 8
ICC-ES Evaluation Report
ESR-4948 LABC and LARC Supplement
Issued August 2022
Revised August 2, 2022
This report is subject to renewal August 2023.
www.icc-es.org | [phone] | [phone] A Subsidiary of the International Code Council
®
DIVISION: 06 00 00—WOOD, PLASTICS AND COMPOSITES
Section: 06 05 23—Wood, Plastic, and Composite Fastenings
REPORT HOLDER:
THE HILLMAN
™
GROUP
EVALUATION SUBJECT:
HILLMAN
™
STRUCTURAL SCREWS
1.0 REPORT PURPOSE AND SCOPE
Purpose:
The purpose of this evaluation report supplement is to indicate that the Hillman
™
Structural Screws, described in ICC-ES
evaluation report ESR-4948, have also been evaluated for compliance with the codes noted below as adopted by the Los
Angeles Department of Building and Safety (LADBS).
Applicable code editions:

2020 City of Los Angeles Building Code (LABC)
 2020 City of Los Angeles Residential Code (LARC)
2.0 CONCLUSIONS
The Hillman
™
Structural Screws, described in Sections 2.0 through 7.0 of the evaluation report ESR-4948, comply with the
LABC Chapter 23, and the LARC, and are subject to the conditions of use described in this supplement.
3.0 CONDITIONS OF USE
The Hillman
™
Structural Screws described in this evaluation report supplement must comply with all of the following conditions:
 All applicable sections in the evaluation report ESR-4948
.
 The design, installation, conditions of use and identification of the Hillman™ Structural Screws are in accordance with the
2018 International Building Code
®
(IBC) provisions noted in the evaluation report ESR-4948.
 The design, installation and inspection are in accordance with additional requirements of LABC Chapters 16,17 and 23, as
app
licable.
 Under the LARC, an engineered design in accordance with LARC Section R301.1.3 must be subm
itted.
T
his supplement expires concurrently with the evaluation report, issued August 2022 and revised August 2, 2022.