Replacement Part List

ManualsBrandsDeckoRail ManualsLumber & Composites3 in. White Offset Aluminum Handrail Bracket

Revised 4/21/11 Page 1

Helpful Tips

• Handrails must be supported every 6' on-center by a 3" Offset Aluminum Bracket.

• For maximum strength, brackets should be used at every post and every joint, or as closely as possible to the joint.

• The 6" Aluminum Joiner Kit or 5-3/4" Adjustable Joiner is necessary to connect any two handrail components.

• The 5-3/4" Adjustable Joiner can be used to make 0 to 90 degree angles if Stair Elbows do not suit your situation.

Total

Railing Section Components Needed per Railing Section Quantity White Tan Adobe Black

90° Inside Corner

1 6" Inside Corner Mounting Bracket

1 90° Inside Corner

2 6" Aluminum Joiner Kits

- - - -

90° Outside Corner

1 90° Outside Corner

2 3" Offset Aluminum Brackets

2 6" Aluminum Joiner Kits

- - - -

Handicap Loop

1 12"x18"x12" Handicap Loop

1 6" Aluminum Joiner Kits

- - - -

2 3" Offset Aluminum Brackets

1 Grab Rail End Cap

1 12"x18"x12" Handicap Loop

1 6" Aluminum Joiner Kits

- - - -

1 3" Offset Aluminum Bracket

1 90° Aluminum Post Return

Line Post

1 3" Offset Aluminum Bracket

1 Handrail with Aluminum Insert

32° Stair Elbow

1 32° Stair Elbow

1 3" Offset Aluminum Bracket

2 6" Aluminum Joiner Kits

- - - -

34° Stair Elbow

1 34° Stair Elbow

1 3" Offset Aluminum Bracket

2 6" Aluminum Joiner Kits

- - - -

36° Stair Elbow

1 36° Stair Elbow

1 3" Offset Aluminum Bracket

2 6" Aluminum Joiner Kits

- - - -

5° Ramp Elbow

1 5° Handicap Elbow

1 3" Offset Aluminum Bracket

2 6" Aluminum Joiner Kits

- - - -

Stair Elbow - Odd Angle

1 5-3/4" Adjustable Joiner

- - - -

2 Handrail with Aluminum Insert sections

Straight Handrail Termination

1 Straight Aluminum Wall Mount

90° Handrail Termination

1 3" Offset Aluminum Bracket

1 90° Aluminum Post Return

180° Handrail Termination

1 180° Post Return

1 3" Offset Aluminum Bracket

1 6" Aluminum Joiner Kit

- - - -

13-1/2" Wall Return

1 13-1/2" Wall Return

1 3" Offset Aluminum Bracket

1 6" Aluminum Joiner Kit

- - - -

Secondary Handrail

Component Worksheet

Our versatile Secondary Handrail system can be joined in any configuration to meet virtually any installation challenge. Use this worksheet

to determine the materials you will need to complete your Secondary Handrail. Prior to installing, check with local building codes and ADA

guidelines for installation requirements.

Check Color Choice

Summary of content (3 pages)

PAGE 1
Secondary Handrail Component Worksheet Our versatile Secondary Handrail system can be joined in any configuration to meet virtually any installation challenge. Use this worksheet to determine the materials you will need to complete your Secondary Handrail. Prior to installing, check with local building codes and ADA guidelines for installation requirements. Helpful Tips • Handrails must be supported every 6' on-center by a 3" Offset Aluminum Bracket.
PAGE 2
Secondary Handrail Component Worksheet List the total quantity of each component below 6" Inside Corner Mounting Bracket 90° Inside Corner 6" Aluminum Joiner Kits 90° Outside Corner 3" Offset Aluminum Brackets 12"x18"x23" Handicap Loop Grab Rail End Cap 90° Aluminum Post Return Handrail with Aluminum Insert 32° Stair Elbow 34° Stair Elbow 36° Stair Elbow 5° Handicap Elbow 5-3/4" Adjustable Joiner Straight Aluminum Wall Mount 180° Post Return 13-1/2" Wall Return Use grid below for basic layout drawing.
PAGE 3
Secondary Handrail Components 3" Offset Aluminum Bracket 8'8" Handrail with Aluminum Insert 3" Offset 90 Degree Aluminum Post Return Straight Aluminum Wall Mount, 1-3/4" Base 1" Grab Rail End Cap 90 Degree Outside Corner 6" Inside Corner Mounting Bracket 90 Degree Inside Corner* 6" Aluminum Joiner Kit 5-3/4" Adjustable Joiner 12"x18"x12" Handicap Loop* 180 Degree Post Return* 32 Degree Stair Elbow* 34 Degree Stair Elbow* 36 Degree Stair Elbow* 5 Degree Handicap Elbow* 13-1/2" Wall Return*