Installation Guide

SECONDARY HANDRAIL INSTALL DIAGRAM
Secondary Handrail Installation Instructions – Page 1
• The height of the secondary handrail must be installed between
34" and 38" above the surface, regardless of the height of the rail.
• We recommend that handrails be dry-fit prior to final installation to
eliminate cutting and fastening errors.
• IMPORTANT: The secondary handrail must be attached to a structural
support. When installing mounting brackets on post sleeves, ensure
the hardware is securely attached to the structural support.
• For maximum strength, brackets should be used at every post and
as close as possible to every joint.
• An adhesive may be applied to further reinforce construction.
• Handrails must be supported every 6' on-center by a mounting bracket.
Prior to construction, check with your local regulatory agency for
special code requirements in your area.
Start with an inside corner piece when applicable.
Guidelines
End Cap
180˚ Post Return
Handicap Loop
Straight Aluminum Wall Mount90˚ Post Return
Aluminum Bracket
(Line Post Mounting Bracket)
Inside Corner
Mounting Bracket
Handrail with Aluminum Insert
Aluminum Joiner KitAdjustable Joiner
32˚ Stair Elbow34˚ Stair Elbow36˚ Stair Elbow
Handrail Componentsd
5˚ Handicap Elbow
90˚ Inside Corner13.5" Wall Return
1
3
5
7
9
12A
12B 12C
90˚ Outside Corner
6
2
4
8
10
11
13 14
15
ADAStairs.ai
4
9
8
127
6
or
8
9
8
6
6
8
2
9
8
5
8
9
8
6
6
1
11
9
6
10
Post Return
Configuration