User's Manual
23
RECORDER
VOICE RECORDING
1. Press REC/STOP button and
voice recording starts.
If recording is started, the
recording time is displayed in
upper line and remain time are
displayed in lower line.
2. To pause recording, press
PLAY/STOP button.
And press REC/STOP button
to resume recording.
When the recording is paused,
recording time is blinking.
3. Press REC/STOP button, and
recording is completed.
MP3 ENCODING
1. Connect the Headphone jack of
the external equipment to the
LINE-IN jack of the player with
Line-In cable .
2. Set the Bit Rate and CD SYNC
in the MENU.
*Refer to "Setting the Recording
Mode"
3. Press REC/STOP button.
4. Press PLAY/STOP button to Pause Encoding.
5. And press REC/STOP button to resume Encoding.
6. Press REC/STOP button, Encoding is completed.
*Test the quality of recording, CD SYNC and external audio volume
before the Encoding.
*Encoding can be failed if the sound is weak on the external audio volume.
*When MP3 Encoding, be sure to connect the cable in the LINE-IN Jack.
RECORDING...
ENCODING...
REMAIN TIME
VOR001.MP3
01:55:01
00:05:03
READY...
01:40:03
Remain time
STEREO 44KHz
Remain time
01:40:03
STEREO 44KHz 128KBPS