Specification
Advantages of Using the DeckWise® Extreme™ Family of Deck Fasteners.
Ability to run screws at a
45 degree angle through
hardwoods greatly increases
hold-down strength. Studies
have proven that screws have
more holding strength when
ran on an angle. is method
also maintains even gap
spacing while properly
allowing boards to expand
and contract with the seasons.
Screws Driven at a 45° Angle
Our line of deck fasteners oer a vast array of gap spacing
options. Whether installing air or kiln dried hardwood,
thermally modied softwood, composite or PVC decking,
we have the appropriate fastener with at least three dierent
gap spacing options for your particular decking.
Gap Spacing
Corrosion resistant, black oxide
stainless steel insert increases
hold down strength and eases
installation by helping to
prevent over-driving of screws.
Stainless Steel Insert
S
t
a
i
n
l
e
s
s
S
t
e
e
l
I
n
s
e
r
t
Symmetrical groove prole
allow boards to be reversed
and/or ipped to put the
best side up.
Cutting Decking Grooves
Many lumber yards now oer pregrooved
materials in stock.
-OR-
Cut the groove yourself using a standard
biscuit joiner or router with a 5/32" slot cutter.
Manufactured By DeckWise®
™
6
DeckWise
®
Line of Ipe Clip
®
Hidden Deck Fasteners Gap Spacing
→
These products are protected under one or more of the following patents; D485,160; 8,464,488; Other Patents Pending, and/or D470,039 product is licensed under U.S. Patent No. 6,402,415
Positioning Decking Grooves
Use With Exotic Hardwoods, ermally Modied Sowoods & Composite Decking.
Unlike most all-metal hidden deck fasteners, which can react with wood causing staining, the
Ipe Clip® is molded of a malleable plastic polymer resin coating (further adding UV & chemical
resistant qualities), allowing for the natural expansion/contraction of wood decking.
Our rigid stainless steel insert rmly holds decking to joists (up to 3X more hold-down strength
than other edge-mount deck fasteners), eliminating decking screws from pulling through as the
deck material expands.
Designed for exotic hardwoods, the color of the plastic resin also works to further camouage
and conceal our fasteners between the board gaps for a more sleek, upscale surface.
Why a plastic coating over a steel insert?