Specification

Air-Dried Lumber & Composites
Gap Spacing 3/32" (2,38 mm)
Features:
• Automatically spaces deck boards at 3/32" (2,38mm)
• Manufactured from polypropylene with stainless steel;
black oxide insert
• For use with air dried hardwood, composite, or PVC decking
• Allows for contraction of width of air dried hardwoods
• Allows movement of length with composite/PVC decking
• Unique design allows for more tolerance in grooved side prole
while increasing hold-down area
• UV resistant
• Limited Lifetime Warranty
Decking Compatibility
Air-Dried Decking
Kiln-Dried Decking
Composite/
PVC Decking
Clip Construction
Material
Stainless Steel Insert
Available Colors
Polypropylene/
Fiberglass
.883" x .883"
ickness: .036"
Allows Contraction on the Width of Air-Dried Lumber
e method of 45 degree screws hold the decking tight to the joist, while allowing one side of the deck
board to remain free to contract and expand.
3/32" (2,38mm)
AFTER CONTRACTION OF BOARDS
Allows Expansion/Contraction Along the Length of Composite/PVC Decking
Running screws straight down with composite/PVC decking allows these materials to naturally move on their length.
3/32" (2.38mm)
During Installation After Installation,
INCREASED GAP SPACING
Fastener Dimensions
.995" (25,27mm)
.094" (2,38mm)
.390" (9,91mm)*
.148"
(3,76mm)
.242"
(6,15mm)
*Short version shown above
Tall version = .375" (9,525 mm)
✓ ✓
×
During Installation
This illustrates how the composite decking moves on its length.
Manufactured By DeckWise®
Hardened stainless steel insert with a black
oxide coang inside rigid UV and chemical-
resistant polypropylene.
Smaller leg maintains a perfect gap when
materials contract due to environmental
condions.
Use With Exotic Hardwoods, ermally Modied Sowoods
& Composite Decking.
8
™