Specification

™
Air-Dried, Kiln-Dried Lumber & Composites
Gap Spacing 5/32" (4,00mm)
Features:
• Automatically spaces deck boards at 5/32" (4mm)
• Manufactured from polyethylene with stainless steel; black oxide insert
• For use with air/kiln dried hardwood, composite, or PVC decking
• Allows for contraction of width of air dried hardwoods
• Allows for expansion of width of kiln dried hardwoods
• Allows movement of length with composite/PVC decking
• Unique design allows for more tolerance in grooved side prole while
increasing hold-down area
• UV resistant • Limited Lifetime Warranty
5/32" (4.00mm)
Fastener Dimensions
.995" (25,27mm)
.158" (4,00mm)
.390" (9,91mm)
.148"
(3,76mm)
.242"
(6,15mm)
Clip Construction
Material
Stainless Steel Insert
Available Colors
Polyethylene
.883" x .883"
ickness: .036"
Allows Expansion on the Width of Kiln-Dried Lumber
5/32" (4.00mm)
AFTER EXPANSION OF BOARDS
During Installation
After Installation - DECREASED GAP SPACING
Allows Contraction on the Width of Air-Dried Lumber
5/32" (4,00mm)
AFTER CONTRACTION OF BOARDS
During Installation
After Installation - INCREASED GAP SPACING
10
e method of 45 degree screws hold the decking tight to the joist, while allowing one side of the deck board to remain free to contract.
e method of 45 degree screws hold the decking tight to the joist, while allowing one side of the deck board to remain free to expand.
Decking Compatibility
Air-Dried Decking
Kiln-Dried Decking
Composite/
PVC Decking
✓ ✓ ✓
Allows Expansion/Contraction Along the Length of Composite/PVC Decking
During Installation
This illustrates how the composite decking moves on its length.
Running screws straight down with composite/PVC decking allows these materials to naturally move on their length.
Manufactured By DeckWise®
Hardened stainless steel insert with
a black oxide coang inside UV and
chemical- resistant polyethylene.
Versale leg is compable
with most decking materials.
Use With Exotic Hardwoods, ermally Modied Sowoods
& Composite Decking.