Installation Guide

INSTALLATION INSTRUCTIONS
DeckWise® • The Ipe Clip® Fastener Company, LLC • 2111 58th Ave. E, Bradenton, FL 34203
Tel: [phone] • Toll Free: 866-427-2547 • [e-mail] • www.DeckWise.com
1. Prep the surface
Make sure the surface being covered is
relatively at and free of anything that
may get in the way of installation such
as sticks, rocks or furniture. Then choose
one corner of the area to begin working in.
Another option is to snap a chalk line for a
straight line to follow during installation.
2. Set rst tile
Many wood-backed deck tiles are milled
with four pre-drilled holes located in each
corner. The Deck Tile Connector ts each
of these holes with four specially designed
ribbed pins (aka Pine tree fasteners). For a
secure t, simply set one of the tiles onto
the preinstalled fasteners. If your corner
holes are not pre-drilled, see our corner
drilling instructions at:
www.deckwise.com/deck-tile-connector-system
3. Set Additional Tiles
Once the rst tile is laid, proceed placing
the other tiles onto the remaining pins.
The Deck Tile Connector automatically
sets the gap spacing to 3/8” so you won’t
have to worry about an uneven look.
Available in 3 Colors
Shadowline Black, Hardwood Brown, & Concrete Grey
Patented; D665,657
HARDWOOD
DECK TILE
CONNECTORS