Owner's manual
PLEASE CONTACT 18663326528 FOR FURTHER ASSISTANCE
DECOLAV.COM
© DECO LAV, INC. 2014
2
ASSEMBLY INSTRUCTIONS
• Make sure not to crimp or pinch wire for safe connections. Plug in the
power cord
CONNECTING THE POWER
2
• Raise Wall Mounted Mirrored Cabinet above Wall Cleat and lower Mirror
Cleat into position. See gure 2 or gure 3
• Gently push down on the top of the Wall Mounted Mirrored Cabinet to
ensure the cabinet cleat and wall cleat are fully seated into position. The
Wall Mounted Mirrored Cabinet should be fully against the wall when
cleats are fully seated
• Slight side to side adjustments can be made by lifting up slightly on the
cabinet or sliding the cabinet left and right
MOUNT MIRRORED CABINET TO FINISHED
WALL
3
• Carefully remove your new mirrored cabinet from carton and place safely
aside
• Determine at what height the wall cleat is to be hung. Mark with pencil
• Using a level, make a horizontal line where the mirror cabinet is to be
hung that is parallel to the oor
• Place the Wall Cleat on this line in the desired location and mark for the
drywall anchor holes (Note: if a hole will hit a wall stud use a screw instead
of a drywall anchor)
• Drill holes for the drywall anchors and install drywall anchors. See Figure 1
SETTING UP YOUR NEW WALL MOUNTED
MIRRORED CABINET
1
RYLAN FALLS WALL MOUNTED CABINET WITH LED LIGHTING
item #1785-PMK-L / 1785-PMK-R
NOTE: Two individuals are recommended for installation of this
product.
Figure 1
Finished Wall
Wall hole
Wall
cleat
Wall
Anchor
Wall
screw
Finished Wall
Wall hole
Wall
cleat
Wall
Anchor
Wall
screw
Figure 2
1785-PMK-L
Figure 3
1785-PMK-R