Specification Sheet
8 3/4"
O.D. 1 5/8" x 11TH
Thread
1 1/4"
3 3/4"
4"
2 3/4"
Overflow
561-274-2110
Customer Service
Model Number: 9297 Series
www.decolav.com
Thick Washer
Drain
Lavatory
Hard Washer
Drain Nut
Tailpiece
Countertop
Product Description - Roughing-in Dimensions
Installation Notes
Push Button Closing Umbrella Drain with Overflow
• Parts and Accessories
• With Overflow
• 1 1/4" Internal Diameter
• Measurement: 2 3/4" x 8 3/4" (including tailpiece)
• CSA Certified: CSA B125-01, ASME A112.18.2 - 2002
• Install Lavatory according to manufacturer’s provided installation instructions.
• Remove Drain Nut, Hard Washer and Thick Washer from Drain.
• Insert Drain into drain hole of Lavatory as shown.
• NOTE: USE OF A NON-CORROSIVE SILICONE SEALANT UNDER
THE FLANGE OF THE DRAIN IS SUGGESTED.
• Apply Teflon to the exposed male threading of Drain.
• Place Thick Washer then Hard Washer over the exposed male
threading of Drain.
• Thread Drain Nut onto Drain.
• NOTE: DO NOT OVERTIGHTEN DRAIN!
• If needed, trim off excess Tailpiece for appropriate length.
• Apply Teflon to exposed male threading of Tailpiece and tighten.
• Install waste system.
• Check for leakage.