Installation Guide

Customer Service: 561-274-2110
www.decolav.com
LET YOUR DREAMS COME ALIVE, YOUR PASSIONS
BECOME REALITY, BE THE ENVY OF YOUR NEIGHBORS
®
1
9721 MIRROR INSTALATION
DO NOT clean the product with Detergents, Acid, Abrasives, Harsh Cleaners or a cloth with a coarse surface (S.O.S.
®
Pads, Scotch Brite
®
Pads).
This is good advice for any plumbing  xture regardless of material.
DO NOT allow your DECOLAV
®
product to unnecessarily encounter other solid objects.
DO clean your DECOLAV
®
product. Wipe with a damp cloth and dry with a soft cloth. If necessary, a general mild soap and water solution can
be used. Use a mild furniture polish to clean wood frame.
DO clean your DECOLAV
®
mirror. Wipe with a glass cleaner and a clean soft cloth. Use a mild furniture polish to clean wood frame.
CARE AND CLEANING
RECOMMENDED TOOLS
Tape Measure
Phillips
Screwdriver
Drill
Level
Pencil
NOTE: Due to vast di erence in building materials, wall anchors and screws are not provided but are recomended throughout instructions.
STEP #1
o Determine at what height the wall cleat is to be hung. Mark with pencil.
o Using a level make a horizontal line where the mirror is to be hung that is parallel to the  oor.
o Place the wall cleat on this line in the desired location and mark for the drywall anchor holes (Note: if a hole
will hit a wall stud use a screw instead of a drywall anchor).
o Bore holes for the drywall anchors per manufactures recommendation and install drywall anchors.
o Attach the wall cleat to the wall by passing screws through the cleat and into the drywall anchor.
Wall Cleat
Screw or wall Anchor
Finished Wall
Figure A

Summary of content (5 pages)