Instructions / Assembly
□ Strip 3/4 in. of insulation from the wire ends of the xture
and from the supply circuit wires.
Attach the supply circuit ground wire to the xture ground
wire and secure the connection with a wire nut (C).
Twist the stripped wire ends of the xture and the supply
circuit wires together: black to (+), and white to (-).
Twist on the wire nuts (C), ensuring that the conductors
are no longer exposed.
Carefully tuck the connected wires and the wire nuts (C)
into the outlet box.
□
□
□
□
NOTE: If the supply circuit does not have a ground wire,
attach the xture ground wire to the mounting bracket (A) with
the green screw. Never connect the ground wire to the black or
the white power supply wires.
1
Installing the mounting bracket
□
□
□
Fasten the mounting bracket (A) onto the outlet box
using the two outlet box screws (B).
Ensure that all supply circuit wires protrude out of the
outlet box.
2
Safety Information
Installation
WARNING: Turn off the electricity at the main fuse box
(or circuit breaker box) before beginning installation by
switching the circuit breaker off or removing the fuse.
CAUTION: Consult a qualied electrician to ensure correct
branch circuit conductor.
WARNING: If cord is damaged, socket must be replaced
by qualied electrician or trained personnel.
WARNING: Min 90°C supply conductors.
2
Making the electrical connections
A
C
B
Black (+)
White (-)
Ground supply
wire
Ground fixture wire
Outlet box