Instructions / Assembly

Assembly Instructions

Laying out all the parts and hardware and identifying each part as shown may help you as you assemble the

table.

ITEM PART DESC. QTY ITEM PART DESC. QTY

1 Table top 1 A Allen Wrench 1

Wooden bottom

Shelf

1 B Screw 8

3 Wood legs 4 C

Adjustable

hardware

STEP ONE

STEP TWO

Lay out all parts listed above on soft, clean and dry

suface. Install three wooden legs by tightening

screws to table top.

Position bottom shelf as shown.

STEP THREE

STEP FOUR

Install the last leg. Match the holes then tighten

screws to table top, and turn the adjustable

hardware

If the table is not level,adjust leg levelers on the

bottom of the legs a bit.

PAGE 1
Assembly Instructions Laying out all the parts and hardware and identifying each part as shown may help you as you assemble the table. ITEM PART DESC. QTY ITEM 1 Table top 1 2 Wooden bottom Shelf 3 Wood legs DESC. QTY A Allen Wrench 1 1 B Screw 8 4 C Adjustable hardware 4 STEP ONE Lay out all parts listed above on soft, clean and dry suface. Install three wooden legs by tightening screws to table top. STEP THREE Install the last leg.
PAGE 2
Instructions de montage Disposer toutes les pièces et le matériel et d'identifier chaque partie comme indiqué peut vous aider lorsque vous assemblez la table ARTICLE PARTIE DESC. QTÉ ARTICLE 1 Dessus de la table 1 2 Plateau en bois 3 Jambes en bois DESC. QTÉ A Clé Allen 1 1 B Vis 8 4 C Quincaillerie ajustable 4 LA PREMIÈRE ÉTAPE Disposez toutes les pièces énumérées ci-dessus sur une surface douce, propre et sèche.