Instructions / Assembly

Assembly Instructions

Laying out all the parts and hardware and identifying each part as shown may help you as you assemble the

table.

ITEM PART DESC. QTY ITEM PART DESC. QTY

1 Table top 1 4 extension legs 4

Wooden

bottom Shelf

1 5

Adjustable

hardware

3 Wood legs 4

STEP ONE

STEP TWO

Lay out all parts listed above on soft, clean and

dry suface. Install legs by tightening screws to

table top.

Place bottom shelf onto the legs.

STEP THREE

STEP FOUR

Install extension legs and screw up all parts below

table top, then turn the adjustable hardware.

If the table is not level,adjust leg levelers on the

bottom of the legs a bit.

PAGE 1
Assembly Instructions Laying out all the parts and hardware and identifying each part as shown may help you as you assemble the table. ITEM PART DESC. QTY ITEM 1 Table top 1 2 Wooden bottom Shelf 1 3 Wood legs 4 STEP ONE Lay out all parts listed above on soft, clean and dry suface. Install legs by tightening screws to table top. STEP THREE Install extension legs and screw up all parts below table top, then turn the adjustable hardware. PART DESC.
PAGE 2
Instructions de montage Disposer toutes les pièces et le matériel et d'identifier chaque partie comme indiqué peut vous aider lorsque vous assemblez la table. ARTICLE PARTIE DESC. QTÉ ARTICLE 1 Dessus de la table 1 2 Plateau en bois 1 3 Jambes en bois 4 LA PREMIÈRE ÉTAPE Disposez toutes les pièces énumérées ci-dessus sur une surface douce, propre et sèche. Installez les pieds en serrant les vis sur le dessus de la table.