Specifications

DeCrane Aerospace Audio International DVD-5x2-01-x Installation & Operation Manual
Document # 540356, Rev C, 12/2008 Page 8 of 38
cover of this manual for address. If no return is necessary, retain
the packing list and the packing materials for storage.
3.2.3 Return only the core unit for replacement or service. Remove
and retain for reuse the bezel, installed rails and pigtail (if used) as
well as any mounting hardware.
3.3 Cautions & Warnings
3.3.1 It is important to do a pin-to-pin power and ground check on all
connectors. Ensure that power and ground are applied only
where specified. Damage to the unit may result if power or
ground is applied to the wrong points.
3.3.2 DO NOT connect or disconnect the unit while power is applied.
3.3.3 DO NOT remove any factory-installed screws. Damage to the unit
may result and void any warranties.
3.3.4 DO NOT drop the unit or subject it to strong shock. The unit
contains glass parts that may break or crack.
3.3.5 DO NOT place foreign objects into openings. Contact with foreign
objects may result in dangerous voltage or electric shock.
3.3.6 DO NOT place near strong magnetic fields, radiators or other
heat sources.
3.3.7 DO NOT use this unit other than for its intended purpose. Doing
so might lead to electric shock or injury.
3.3.8 DO NOT use near water, moisture, or volatile sprays. Do not use
any type of solvent when cleaning (surface damage may occur).
3.3.9 DO NOT look directly into the laser beam through the disc slot
opening. Eyesight may be damaged.
3.3.10 DO NOT place fingers in disc slot. Device may pinch fingers and
may cause injury.
3.3.11 DO NOT expose unit to sun or bright light. Damage to the sensor
may result.
3.3.12 The chassis material and structural design of this unit is such that
the unit is not capable of containing fire within the unit. This unit
does not provide for waterproof operation.