Specifications

O W N E R S M A N U A L
Decware High Fidelity Engineering Co., East Peoria IL, USA www.decware.com
2) Install Power Cord
Each amplifier has a high quality IEC connector. This is an overlooked item on most
amplifiers and are typically made in China with inferior plastics, metals, and feature
poor electrical connections and earth grounds that change with tension, and
temperature. This includes the gold plated ones being sold to unknowing audiophiles
at an inflated price. Our power cord connector, being quite the opposite, is fully
worthy of an expensive power cord.
Note: Having the power cord go straight up and then curve straight down, relieves
the leverage on the contacts inside the power cord which in turn prevents it from
prematurely wearing out.
Fuse
The IEC connector where the power cord plugs into has a concealed door that can
be pried open to reveal the fuse holder. Inside it there is also a spare fuse. The fuse
should be a 20x5mm with a maximum rating of 5 amps. If you have a 240VAC model
your fuse should be 2.5 amps. Fast Blow types are recommended.