Setup guide

Dedicated Micros Page 91
Audio Trace
It is possible to use the audio trace option to identify if audio is being
transmitted or received by the Digital Sprite 2.
To view the audio select the line in or line out buttons, the corresponding audio signal will be
traced.
Function Description
Video Input This is a drop down list of the available video inputs on the Digital
Sprite 2.
Resolution This is a drop down list allowing selection of the resolution being
viewed/traced (high, medium and low).
Input Path This is a drop down list allowing selection between free use or
preselector 1 – 4.
V and H Position When a line of video is selected this identifies the vertical and
horizontal position. For the overall image these values will be 0.
Show Trace This allows the R, G, B trace to be enabled or disabled.
RGB These are the calculated values for the RGB contents within the
whole image or the selected line.
Function Description
Audio Line Out This will produce a trace of the audio out line on the Digital Sprite 2. This
is represented by a red line.
Audio Line In This will produce a trace of the audio in line on the Digital Sprite 2. This is
represented by a blue line.