Setup guide

20
ENGLISH
20
Standard Recording Schedule
The record rate and the image size determine how long cameras can be
recorded for and the update rate for each camera. Settings can be applied to
day, night and weekend schedules.
The record rate for the Digital Sprite 2 has a maximum record rate (Standard
and Alarm) of 50PPS for PAL standard cameras and 60PPS for NTSC
standard cameras.
The screen displayed for the Standard Record settings will depend on whether
the Schedule Rate is enabled and the Schedule function has been enabled for
Day, Night and Weekend Operation mode.
With the Schedule Rate function disabled, the record rate is the permanent
record rate for the cameras enabled for recording.
Note: The standard record rates set for each of the operation modes are the
number of pictures per second across all cameras enabled in standard
recording.
Units
The settings within this menu can be configured in either the number of
Pictures Per Second or Milliseconds. Using the move the cursor to the PPS
option and use to select ms (milliseconds).
Standard Recording
Units PPS
Maximum Record Time - - Days - - Hours
Record cameras
Edit
Maximum Storage (Protected %) 0300 GB (00%)
Earliest unprotected recording 31/May/2005 23:55
05 - 46KB
Standard
Rate
Events
Rate
Event
Active
Event
Mode
Disabled, Alarms,
Activity, Both
Unchanged, Interleave
Exclusive
Unchanged, Interleave
Exclusive
Unchanged, Interleave
Exclusive
Disabled, Alarms,
Activity, Both
Disabled, Alarms,
Activity, Both
Day
Night
Image size 18KB
Weekend
6
6
6
Both
Unchanged
Both
Unchanged
Both
Unchanged
6
6
6
Keyswitch
The input which activates the keyswitch can be configured for one of the
following options:
• None - There is no keyswitch operation enabled.
• Direct - The direct input on the rear panel has been allocated as the
keyswitch trigger.
• Aux - The Aux input on the rear panel has been allocated as the keyswitch
trigger, select a contact.
• Module 01 - Module 16 - select any input on any module to be the
keyswitch trigger.
The keyswitch is used to change the unit from one time mode (Day, Night,
Weekend) to another when the input programmed in the settings is activated. If
the Digital Sprite 2 is in Day mode operation, when the input is received the
unit will switch to Night mode. If it is in Night mode the unit will still switch but it
will remain in Night mode. If the unit is in Weekend mode again the unit will
switch but remain Weekend mode.
As the keyswitch is switched off. If the Digital Sprite 2 has been configured for;
• Day mode the unit will stay in day mode, and apply day settings.
• Night mode the unit will switch to day mode and apply the day mode
settings.
• Weekend mode the unit will switch to day mode and apply the day mode
settings.
Note: If the Installer has manually configured an individual schedule mode on
an alarm zone different to the rest of the zones or on a camera different to the
rest of the cameras (ignoring 24Hr zones), the option will switch to a read-only
field and display Custom.