DS2 Setup Guide
Dedicated Micros ©2007
33
DS2
Schedule
A schedule can be used to record selected cameras at different times, change the record rates, and
select whether alarms or activity is enabled.
Schedule Type
Night
Weekend
Keyswitch
Holiday
Timed
On
Off
None
Edit
Zone Control, Timed
On Between, 7 Day Timer, Off, On
On Between, Off
Direct, Aux, Module 1-16, None
S
chedul
e
Schedule type
This determines how the schedule will operate, the options available are:
• Timed (default) - allows settings to be congured for set times during the day, night and
weekend, and enables or disables the Keyswitch and Holidays options.
• Zone Control - This enables or disables Night Zone or Weekend Zone settings.
Note:
Enabling Zone Control will override any timed Schedule setting and will switch into Night
or Weekend mode when an alarm is activated. Refer to Zone Conguration for more
information.
Night
The Night option allows times to be congured to determine when the night settings would be
applied.
The options are:
• On - Night settings would be permanently applied.
• 7 Day Timer - This activates a sub menu where Day and Night times can be allocated, refer
to the 7 Day Timer section.
• On between - this allows the start and end times to be set when the Night settings will be
applied.
• Off - When the night option is off the Day settings will be applied at all times (default).
It is possible for a designated remote operator to temporarily override these settings if the unit is
congured to allow this. For more information, refer to Advanced Alarm Settings.
7 day Timer
This sub-menu allows a schedule to be independently set for each day of the week.