DS2 Setup Guide

DS2

Network Options

This option allows you to congure the Network connection on the unit.

DHCP

TCP/IP address

Subnet mask

Default gateway

More Network Options

Remote Reporting

Email Settings

SMS Settings

Web Cam Settings

Firewall

Disabled

172.016.080.007

255.255.000.000

000.000.000.000

Edit

Enabled Edit

Edit

Disabled, Enabled

Network

ptions

DHCP

The unit needs a unique IP address and subnet mask to communicate over a network.

The unit can be installed in a DHCP network environment where an IP address, subnet mask and

default gateway will be automatically allocated from the network DHCP Server. This is enabled by

default.

Disabling this option requires a static IP address and subnet mask be manually congured.

NOTE:

A DHCP address is temporary and can change, therefore it is recommended that the unit be

allocated a xed (permanent) IP address, subnet mask and default gateway. Alternatively

power up with DHCP enabled and once an address has been assigned disable DHCP. The

assigned IP address will then be permanent.

TCP/IP Address, Subnet mask, Default gateway

This allows a permanent IP address, subnet mask and default gateway to be allocated to the unit.

On an existing network this information is often obtained from the network Administrator. A Default

gateway will be required if the unit is to be accessed from a remote location, such as via a WAN or

dial-up using a router.

Note:

DHCP must be disabled to congure a static IP address.

More Network Options

This submenu allows advanced network settings to be congured.