DS2 Setup Guide

Dedicated Micros ©2007
57
DS2
Protect Alarm Images
If the recorded alarm images are to be automatically protected (indenitely or for a set period) then
the ‘Protect Alarm Images’ option must be enabled.
Close Relay
Record Still Image
Email Image
Email Image Res.
Goto Camera Preset
Apply Zone 01 Actions to
No Relay
Disabled
Enabled
Thumbnail
Disabled
Zone 2
No relay, Module 1, Aux Relay 1
Disabled, Enabled
Enabled, Disabled
Low Res, Medium Res, High Res
Enabled, Disabled
Zone 02 - 32, All Zones
Zone
0
1 Actions
Close Relay
It is possible to force a relay to close on receipt of an alarm trigger. The options available are:
• Aux - The are six on-board relays any of these can be selected within this option.
• Module 1 - An additional relay module can be connected via the 485 bus, one of the sixteen
relays can be selected within this option.
Record Still Images
This will record a still image of the alarm camera along with the normal recording.
Still images are accessible through the Live page of the web interface.
Email Image
When e-mail on alarm is enabled it is possible to attach an image to the e-mail. An e-mail will be
automatically sent to a recipient when an alarm trigger is received.
Email Image Resolution
This determines the resolution of the attachment within the e-mail. The options available are:
• Thumbnail.
• High Resolution.
• Medium Resolution
• Low Resolution.
It is important to take into account the speed of the remote network link when conguring this option.
Note:
The resolution setting selected is a global resolution and will be common to all zone and
VMD alarms.
Goto Camera Preset
It is possible to action a camera to be sent to a preset position when an alarm zone is triggered.
Highlight the option and press the button to enable this feature.
When enabled a Preset and Camera option will be displayed. Use the button to move to the
preset option, press the or to scroll through the preset options.
Use the to move to the Camera, use the or to scroll through the camera numbers. This is the
camera that will be automatically sent to the selected preset position.