DS2 Setup Guide
Dedicated Micros ©2007
79
DS2
Ensure the serial type has been selected in the ‘Serial and Telemetry’ menu. This option then allows
these settings to be allocated to specic video inputs.
The options available are:
• None - Camera does not have an associated serial device.
• Coax - Dennard.
• Coax - Pelco.
• Coax - BBV.
• Serial 1 - Selected RS-232 protocol (default disabled).
• Serial 2 - Selected RS-232 protocol (default disabled).
• Serial 3 - Selected Bus A RS-485 protocol (default Dennard).
• Serial 4 - Selected Bus B RS-485 protocol (default Pelco).
Use the or buttons to scroll through the available options.
Note:
The settings shown are an example of the options available.