User guide

Dedicated Micros ©2006
20
NetVu ObserVer
Save/Load a Display Preset
NetVu Observer supports the ability to save a Display Preset.
The application remembers the image servers being controlled, the cameras inputs being viewed and the
position the images are displayed when a display preset is saved.
Note:
This does not apply to any Temporary image servers that are selected for view, it will only
recall the Stored image servers and corresponding cameras.
This view can then be selected at any time and the software will automatically re-establish the connections to
the relevant image servers and display the correct camera inputs in the correct location.
To do this, select File -> Save Display Preset, the following screen will be displayed.
Enter a relevant name for the display for easy selection.
To recall a saved Display Preset, select File -> Load Display Preset and select from the list for the relevant
Display. It will be automatically displayed.
Live Mode Controls
This section describes the controls that are available to the Operator when NetVu Observer is in Live mode only
Live Mode
This switches the viewer into Live mode operation, all images displayed will be live video from the image servers
being controlled.