Operating instructions

Dedicated Micros ©2010
106
SD Advanced
Live Transmissions
The unit transmits live images using JPEG or MPEG formats.
The NetVu Connected remote viewing software will use the settings congured on this page as the
defaults for JPEG & MPEG; High, Medium and Low settings.
Filter by The resolutions available for selection will depend on the camera
types connected i.e. Standard Resolution or Megapixel Resolution
and whether Turbo Mode has been activated via the Prole
Record menu (Record Settings->Prole Record). Note that the
Megapixel Resolution option will only be available if a megapixel
camera is connected.
IMPORTANT:There are three classications of IP camera:
1. Standard Resolution - QCIF,CIF,2CIF,4CIF
2. Standard Resolution (VGA) - VGA,SVGA,QVGA,Q2VGA
3. Megapixel - VGA,SVGA,UXGA,QVGA,Q2VGA,XGA,XGA+,SXGA+,QXGA
The classication of each connected camera channel can be viewed via the CamCong menu
(System Settings->Status->About->CamCong).
High LAN/Medium WAN/Low VLBR This shows the transmission settings congured for a High quality
LAN (Local Area Network) connection, Medium quality WAN
(Wide Area Network) connection or a Low quality VLBR (Very Low
Bit Rate connection).