Operating instructions

Dedicated Micros ©2010
112
SD Advanced
Remote Reporting
This menu details the conguration requirements for the unit to report to a Remote Video Receiving
Centre (RVRC) following alarm activation.
Note: This menu will only be displayed if ‘Remote Reporting’ is selected in the
System Settings->Features menu.
Primary Hostname This is the IP address or URL of the initial host that the unit will
transmit an alarm message to.
Primary Dial Prole It is possible for the alarm message to be transmitted via the
Ethernet network or a dial up connection.
Secondary Hostname If the unit is unable to contact the primary host, an alternative
route can be identied via a secondary host. If there is only one
alarm receiving IP address, you must enter the details in both the
primary and secondary connection settings.
Secondary Dial Prole It is possible to select a separate dial prole for the
secondary host.
Public (NAT) Address This is the public IP (or domain name) for a unit connected to
the Internet via a NAT Router or Firewall. This eld should be left
blank if NAT is not used e.g. a private network.
Video Server Port This eld allows the RVRC to connect to the unit through a router
that is using port forwarding e.g. if the video server does not
appear on port 80 (HTTP), to the external network. Enter the port
number used for forwarding here if required.