Operating instructions

SD Advanced

Step 3 Connecting Audio

The SD Advanced supports two channels of bi-directional audio, accessible through NetVu

ObserVer. Connect the audio equipment to the phono sockets AUDIO IN and AUDIO OUT. The

audio channel defaults to recording camera 1.

The following modes of operation are supported:

• Challenge – intruders from an RVRC.

• Listen – to local audio from a site at the RVRC.

• Record - local audio from a site with the video.

• Replay - all audio through a local Audio output (not supported when

Audio out is used as a challenge/PA source).

 Note: The Audio output can be congured as a challenge output or as a replay output.

Step 4 Connecting to the Network

The unit supports a 10/100Mbps auto-detecting network port. Use a CAT5 cable to connect the unit

to the network.

By default the unit is congured for DHCP i.e. the unit is automatically allocated an IP address from

a network DHCP server.