Operating instructions

Dedicated Micros ©2010
149
SD Advanced
Program Page
The Program Menu page allows the PTZ conguration on the currently selected telemetry camera to
be accessed and congured.
Red Dome Select to display the Dome Menu page.
Green Store Use to save the current view as a Preset for this
camera. Press this button then a preset position
(using the numeric keys on the IR Remote
Control or optional Keyboard if viewing via a
local monitor).
To re-send the camera to this position, select
the camera, then press Next -> Preset -> (preset
number).
Note: When entering a new preset, any previous preset assigned to that number (for the same
camera) will be overwritten.
Yellow Select This option will send the camera to
the stored ‘Preset1’ position.
Blue Set Origin The Origin option allows a base position to
be established for the Oracle dome camera.
The camera will register this position as zero
degrees. Any command that sends the camera
to a coordinate will use this origin as its starting
point..
Note: This option is only available for Oracle dome cameras.
Purple Back Return to the ‘PTZ Program Option’ page.