Operating instructions

SD Advanced

Simple Record

Menu View Switch to the Advanced Prole Record menu.

IMPORTANT: If Turbo mode is ‘Disabled’ and record settings have been congured which

will exceed the unit’s Codec performance threshold. A warning message will

be displayed informing the user that the ‘Unit needs to be in turbo mode’. If the

unit is currently in turbo mode and the currently congured record settings do

not warrant turbo mode, a message will be displayed informing the user that

‘At the current settings the unit does not need to be in turbo mode’.

The codec’s performance thresholds are detailed in the About-Codec Loading

menu (System Settings->Status->About->Codec Loading)

Days Recording Displays the record duration possible using the current

conguration.

Channel Enables selection of a specic camera for editing.

Copy To End Select to copy the current prole record settings to all camera

channels.

Copy To Next Select to copy the current prole record settings to the next

camera channel.

Turbo Mode Select to activate the Turbo mode function (see ‘What is

Turbo mode?’ for a description of Turbo mode and

its benets).

Unset/Set/Override Normal Shows the recording prole used by the camera if no Timer Functions

are applied and the camera is operating under Normal (non Event) conditions. Refer to the

‘Schedules’ section for further details.