Operating instructions

SD Advanced

Prole Change Select to enable the unit to switch from Normal to Event recording

following alarm activation.

Alarm Reporting This must be enabled for the unit to automatically connect

on alarm.

Alarm 24Hr This will ensure that Activity Detection is permanently enabled on

this camera channel.

Add Still Image This will record a still image of the trigger along with the standard

recording. This can then be sent on to an external destination.

Protect Alarm Images Select to automatically protect alarm images from

being overwritten.

Alarm Relay Select to trigger an alarm relay following zone activation. Select

the specic relay via the ‘Relay’ option.

Email Image If this option is selected, a JPEG will be added to the reporting

email (if Email Reporting is selected).

Enable in Unset This will enable Activity Detection when the unit is in Unset

operation mode.

Enable in Set This will enable Activity Detection when the unit is in Set

operation mode.

Enable in Override This will enable Activity Detection when the unit is in Override

operation mode.

Note: Unset, Set and Override modes can be given more recognisable titles i.e. Day, Night,

Weekend via the Schedule menu (Record Settings->Schedule).