Operating instructions

SD Advanced

Activity Setup

The unit supports Activity Detection on all video inputs. It enables cameras to automatically detect

any movement/changes within the video scene; this can trigger a number of operations such as FTP

alarm notication and an increase in recording rate.

A still image of the selected camera will be shown in the Grid Editor screen. To establish an Activity

zone, edit the cells displayed across the image.

This option should be used in conjunction with the Zone Inputs and Zone Actions menus.

Global Activity Mode Three options are available for Activity activation (specically in

relation to a PTZ camera).

Selecting ‘Active while at Preset 1’ will result in Activity mode

functioning only when the camera is at preset position 1. Select

‘Active while camera not in motion’ for Activity mode to function

only when the camera is still. Select ‘Always Active’ for Activity

mode to be in constant operation.

Activity Channel This is a drop down list of the video inputs on the unit, selecting

an input will display images from the corresponding video source.

Edit Action Select ‘Invert’ to change the current grid state i.e. Clear to Set.

Select ‘Clear’ to remove grids or select ‘Set’ to add grids.

Activity Sensitivity This option allows the sensitivity setting to be established for the

activity grid being congured. There are ve settings to choose

from: Indoor High, Indoor Low, Outdoor High, Outdoor Low,

Very Low.