Installation manual

2060

3. Attach the Transfer Disc to the top of the dome enclosure using 4x pretted M6 cap

head screws (D).

Note: Fit the safety bond bracket (E) as shown.

4. Fit the safety bond between the enclosure and the mounting disk.

5. Offer the dome enclosure up to the ceiling mounting disk, (shown upper right)

engaging the screw heads (C) into the keyhole slots on the base of the dome (F)

enclosure. Twist once located to secure, then tighten screw heads (C) to secure the

dome enclosure to the mounting disk.

Note: Ensure the safety bond is tted.