Installation manual
Dedicated Micros ©2009
16
2060
Dome Mounting - Indoor Dome
1. Secure & hang the dome to the bracket by attaching the safety bond spring clip to
eyelet (as shown).
Note: Wall bracket shown. Procedure is the same for Snowdrop/Roof Parapet installation.
2. Connect the central connector supplying power & control to the dome.
Note: Ensure power is OFF before connecting the dome.
3. Lift the dome to bracket ange ensuring head of screws (previously tted
M6x20mm Caphead Screw) pass through the keyhole slots. Twist to locate and
lock.
4. Tighten the 4 top mounting xings with 5mm A/F Hexagonal key (as supplied) to
secure. Finally secure the plastic cover to the metal pins on the bracket ange.