Technical data

22
DTG(E)130 - 35/45/65/90/115 Eco.NOxPlus 15/02/2011 - 300014279-001-J
4. Control panel
4 Control panel
4.1 Electromechanical components

The panel must always be supplied with 230V voltage:
- to ensure the anti-grip of the heating pump.
Use the mode:
- "summer" to shut down the heating.
- "antifreeze" to shut down the boiler if you are to be absent.
If a remote control is connected, it will not show a display when the
main switch is in the OFF position.
Z
See chapter Operating mode
Z
See chapter Summer mode
4.2 Display
2
13
0
bar
4
2*1
0 2 4 6 8 1012141618202224
A
2*
4
3
bar
C000142_00
SUNDAY
-04
1 Main ON/OFF switch
2
Pressure gauge
* Depending on the model of the appliance, the pressure gauge is
manual (dial display) or automatic (pictogram display)
3
On light / Alarm
Green LED LIT: normal operation
Red LED lit: Burner in safety condition
Flashing red Led: abnormal operation (See chapter "10
Messages - Alarms")
4 Safety control box reset button
024681012141618202224
A
bar
3 4 5 6 7
91011
8
2
1
BC
SUNDAY
1 Text and numerical display
2 Graphic display bar for the programme in circuit A, B or C
3
Light area: Reduced temperature heating period or tank load
disabled
4
Dark area: Comfort temperature heating period or tank load
enabled
5 Flashing cursor showing the current time
6 Number display (current time, adjusted values, parameters, etc.)
7
Active programme display, P1, P2, P3, P4
or
Su: automatic “Summer“ cut-off
8
The arrows flash when setting values can be modified using the
+ and - keys
9 Circuit operation symbols
>
=
:
A, B, C
Opening the 3-way valve
Closing the 3-way valve
Displayed circuit pump on
Name of the circuit displayed
10 Symbol displayed above the active operating mode
11
Symbols indicating that the following inputs/outputs are
active
D

#
T
Burner on
DHW load pump on
Summer mode
Not available