Operating instructions

Assembly

Tools required :
- Philips head screwdriver
- wide flat screwdriver
- 13 and 17 mm wrench
- hammer
- silicone glue
- JDTE Plus ASME assembly tool
- simplified assembly tool
Step 1
Preparing the front and rear sections
Installing the height converter and the adjustable feet on the
rear section
`Fix the adjustable feet (supplied in the bag containing the
casing fasteners) onto the height converter.
`Place the rear section on the floor and fix the height converter
(2 HM 10 x 25 screws, 17 mm wrench).
Step 2
`Fix the adjustable feet onto the height converter, place the front
section on the floor (with the groove facing up) and fix the height
converter.
17
8227N014A
2
1
8227N019
1
2
3
4
10
GT 210 A 21/08/06 - 94863106 - 82274096E