Operating instructions

Step 3
1. Support the section with a wooden block.
2. Place a block with a height of approx. 5
15/16
(depending upon the
number of sections, the length varies from 12
5/8
- 32
1/4
).
3. Clean the bores and nipples with thinner.
4. Coat them with the coating material supplied.
5. Push in the two nipples moderately.
Step 4
Assembling the sections
`Place the intermediate sections on the floor, groove upwards.
`Prepare the silicone cartridge.
`Put a drop of silicone at about every 7
7/8
of the groove of the
intermediate and front sections.
Step 5
`Working from point A as shown above, insert the silicone braid
into the groove of the intermediate and front sections.
`Cut it to the correct length.
1
2
4
3
5
5
15
/16
8227N016A
A
1
2
8227N017A
11