Operating instructions

GT 210 A 21/08/06 - 94863106 - 82274096E

Step 8

Assembling the outlet, return and draining tubes

`Coat the threaded and tapped connections of the sections,

tubes, plugs and thimble tubes with pipe dope (not supplied).

`Screw the 2 outlet and return tubes and the draining tube onto

the rear section.

`Screw the threaded plug with the thimble tube in the upper

connection and the other in the lower connection.

`On the front, install the two M10 pins in the holes designed for

that purpose.

Step 9

Assembling the door with right-hand opening

1 Put the lower hinge in place, press it against the front section and

fix it with an HM 10x50 screw + wide CL 10-20 tapered washer (17

mm wrench).

2 Assemble the other HM 10x50 hinge and wide CL 10-20 tapered

washer.

- for 4 and 5 section boilers use 1”1/4 NPT flow pipe.

Place the smaller threaded side to the outside.

- for 6 to 8 sections boilers use 1”1/2 NPT flow pipe. Place the

threaded side with the yellow marking to the outside.

The assembled body shall be tested with a water pressure of 90

psi (1,5 maxi working pressure).

8227N025B