Operating instructions

GT 210 A 21/08/06 - 94863106 - 82274096E

Step 20

Installing the insulating material

`Place the insulating material around the body and fix it with two

straps.

`Put one strap on the front, underneath the control panel and the

other at the middle of the remaining part.

Step 21

`Place the two lower side pieces (with the round hole towards the

front and the oblong hole towards the back of the boiler).

`Install :

• to the front with a screw, serrated washer and nut,

• to the rear with a screw, LL washer and nut.

`Screw the screws tightly into the notch of the front height

converters.