Operating instructions

21/08/06 - 94863106 - 82274096E GT 210 A

Step 22

Assembling the side panels

`Insert the side panels from the bottom into the notches on the

lower side pieces.

`Put the side panels in contact with the upper rear cross bar.

`Lift the panels up slightly and fit them in.

`Install them to the front of the control panel with two tapping

screws and serrated washers.

`Tighten the screws of the rear crossbar.

Step 23

Assembling the lower front panel

`To mount the lower front panel, proceed as follows:

1. Assemble the two tapping screws and serrated washers on the

left and right-hand side panels.

2. Slide lower front panel 2 onto the two tapping screws and

serrated washers.

3. Install two tapping screws and serrated washers on the lower part

and tighten the four screws.

8227N148