Operating instructions

21/08/06 - 94863106 - 82274096E GT 210 A

Step 26

`If the boiler is connected to the installation, cut the panel with

cutting pliers along the cut-outs.

`First assemble the lower part with four tapping screws and

serrated washers.

`Then clip on the upper part.

`If required, assemble the lower part once again to conceal the

cut edges.

`Install the upper part with four tapping screws and serrated

washers.

Step 27

Electrical connections:



The electrical connections shall be performed by a

qualified professional (see the instructions supplied with

the control panel).

Step 28

`Assemble the cover, placing it on studs A located on the front

and rear of the left and right-hand side panels.

`Install with four tapping screws and washers.

8227N041A

N042A