Technical data

13
08/06/06 - 300008460-001-B MCR 24, 24/28 MI, 30/35 MI, 34/39 MI
2 Parameter display
The following parameters can be displayed in the information menu
:
- t1 = Flow temperature (°C)
- t2 = Return temperature (°C)
- t3 = Tank sensor (°C)
- t4 = Outside temperature (°C)
- FL = Ionisation current (µA)
- nF = Fan speed (rpm)
- Press the Ä key. The symbol  flashes. To access the
parameters, press key l.
- Press the + key successively to scroll down the various
parameters.
2.1 Setting the manual mode ()
- Press key Ä several times until the symbol  flashes on the
menu bar.
- Press the l key. The minimum outlet temperature P1 or the text
Auto is displayed if an outside temperature sensor is installed.
- Press the + key to increase the outlet temperture manually.
- To confirm, press the l key.
The installation is in manual mode.
- Press key  1 time to deactivate the manual mode.
- Press key  1 time to return to the current operating mode.