Technical data

50
MCR 24, 24/28 MI, 30/35 MI, 34/39 MI 08/06/06-300008460-001-B
2.4 Burner maintenance
Clean the burner with a brush, a vacuum cleaner or a blower.
Inspect the burner to detect any damage or cracks in the surface. If
the burner is damaged, replace it.
2.5 Maintenance of the heat exchanger
- Check the burner seal.
- Check the insulating component between the front plate and the
thermal exchanger.
A damaged or hardened seal must always be replaced.

Handle the front plate and the rear plate of the thermal
exchanger with care; they must not come into contact with
water.
- Descale the exchanger in order to maintain its performance levels.
- Clean the inside of the heat exchanger using a stiff brush
(optional).