User manual
Table Of Contents
- Introduction
- Hardware description
- Software
- DELIB API reference
- Appendix
DELIB API reference |Seite 46
4.5. Setting Digital outputs
4.5.1. DapiDOSet1
Description
This is the command to set a single output.
Definition
void DapiDOSet1(ULONG handle, ULONG ch, ULONG data);
Parameters
handle=This is the handle of an opened module
ch=Specifies the number of the output to be set to (0 ..)
data=Specifies the data value that is to be written (0 / 1)
Return value
None